SWARM - Counts vs M/S

SWARM
6

Hello jheiler,

I have re-installed my SWARM setup from scratch (currently using the latest version provided, 3.2.0), and after setting up the connection to the RS FDSNWS, I can see a successful counts to m/s conversion for both mine and your stations:

image
image1583×729 98.3 KB

Here’s the procedure to set it up as I did:

  1. Open the Data Chooser window from the Window menu
  2. Create a new Data Source by clicking on the relative icon
  3. In the new window that appears, assign it a name as usual, and then go to the FDSN WS tab
  4. In this tab, please insert the following:

Dataselect URL https://data.raspberryshake.org/fdsnws/dataselect/1/query
Station URL https://data.raspberryshake.org/fdsnws/station/1/query

  1. If not already selected, select Need Update from the dropdown menu, and then click on the Update button.

It may take a while, but after the process is complete, you can search through the list for your Shake/Channel combo, and you should be able to display a good counts to m/s conversion too.

If, instead, your SWARM is connected to the Shake directly on your LAN via Winston Wave server, then I’m not sure how to feed SWARM itself the correct instrument response information so that the software can calculate the m/s conversion. Maybe the software manual could be of help, and, in case you require it, you can download your Shake response file here: https://data.raspberryshake.org/fdsnws/station/1/query?network=AM&station=R28DF&level=resp