Raspberry Shake not appearing on Stationview and Shakenet

Technical Support
1

I currently have 4 raspberry shakes set up (3 RS3D and 1 RS4D) and want to test out data streamed on Shakenet. Only 1 out of 4 is showing up and in station view 2 out of 4 (but a different unit to the aforementioned “1” ) and on station view the location of one of the units is off by a considerable distance.
Here are the serial of the units I am talking about:

  • R9AD7 (only device to say “Not Connected” on Server Connection)
  • R1F21 (shows up only on Shakenet and data is streaming fine)
  • RF81F (shows on Stationview and is steaming)
  • RC071 (shows on Stationview and is streaming but the coordinates is different than input on rs.loca/)

I’m not entirely clear on the procedure but below are the log files. Thank you in advance!

RSH.R9AD7.2021-02-22T09_31_28.logs.tar (2.6 MB)

RSH.RF81F.2021-02-22T09_30_49.logs.tar (2.6 MB)

RSH.R1F21.2021-02-22T09_28_30.logs.tar (2.2 MB)

RSH.RC071.2021-02-22T09_38_33.logs.tar (2.2 MB)

2

hello,

all of those stations are appearing in station view, though they all stopped streaming data to the server about 9 hours ago.

regarding the location being off, it is by design that we obfuscate the exact location somewhat (usually not off by more than a few kilometers) in the interest of privacy protection.

let us know if you have any other questions,
richard

1 Like