Returning to net after internet provider failure

I would like to return to the network. My unit has been operating for several months as a “stand-alone” fpr local monitoriing only, due to the loss of my internet provider. During this time, the clock stopped updating. My intenet is now restored but I am not reconnecting to the network.

Raspberry Pi Model : 3 Model B+
System Status : RUNNING
System Version : 0.18
Ethernet Local IPv4 :
Ethernet MAC : b8:27:eb:e2:aa:e7
Data Producer : ON
Data Consumer : ON
Stand-Alone : OFF
Data Forwarding : ON
Server Connection : Not Connected
Latitude : 36.1341
Longitude : -115.9965
Elevation : 798 m
System Time : 2020-11-14 21:43:17 UTC
Disk Usage : 14% Used – 25766Mb Available
CPU Temp : 55 C / 131 F
Uptime : 0 Days 5 Hours 26 Minutes


this is most likely due to the fact that your clock is now too far off from real time that the NTP command is refusing to set it.

please have a look at the 2nd part of this page in the manual for a couple of different solutions to this:

after you’ve set your clock manually to close to real time, reboot and see if there is a change. if not, please send along your log files so we can have a deeper look.


1 Like